We see through concrete, map what runs underground, capture buildings as data and prove what holds. One specialist team, from reality capture to structural testing, working to the standard on every job.
Two disciplines, one accountable team. Choose a service, or send us the brief and we will scope it.
See the rebar, conduit and post-tension cables hidden in the slab, before the drill goes anywhere near them.
See how it works
Capture the whole structure to the millimetre and hand your designers a model they can build from.
See how it works
Know what runs beneath the ground before you break it, detected and mapped to PAS 128 quality levels.
See how it works
The land, the levels and the boundaries, measured precisely for planning, design and setting out.
See how it works
Reach the roof, the facade and the high-level detail without scaffold or rope access. Flown by licensed drone pilots.
See how it works
Prove the ground will carry the load, tested in situ for foundations and working platforms to BS 1377.
See how it works
Prove the fixing holds before you trust it, pull-tested on site for anchors and ties to BS 8539.
See how it worksMost firms do geospatial survey or structural testing. We span both, so the data that comes off site is consistent, calibrated and owned end to end.
Send us the briefFrom PAS 128 utility quality levels to BS 8539 anchor loads, the method is written down before we mobilise, and the results are checked against it. Referenced, not implied.
Surveys come back as registered point clouds, drawings and reports you can hand straight to a designer, engineer or building control.
Scope, site work, processing and reporting run through the same people, so nothing is lost in translation between disciplines.
On site across the country, run out of London. Same standard everywhere.
Most projects need a survey firm and, later, a testing lab. We are both. The same team scopes, captures and verifies your site, so there are no handoffs and no gaps where accountability falls through.
We record the site as measurable, shareable data, above and below the surface.
We prove the ground and the fixings perform, tested on site to British Standards.
Every job references the standard it is measured against, from PAS 128 to BS 8539. The method is written down.
Surveys come back as clean point clouds, drawings and reports you can hand straight to your team.
Scope, site work, processing and reporting run through one team, so nothing is lost between disciplines.
A clear, repeatable method on every job, so you know what is happening on site, and what lands on your desk afterwards.
We agree the objective, the deliverable and the standard the work is measured to before we mobilise.
Scan, survey, inspect or test on site, worked around access, live operations and out of hours if needed.
Point clouds registered, utilities mapped, results analysed and checked against the referenced standard.
Drawings, models and signed-off reports delivered in the formats your team already uses.
Scan Surveys sits within Guardian Management Group, alongside our property and specialist surveying businesses. One group, one address, accountable work.
Tell us the site, the deadline and what you need to know. We will confirm the right survey or test, the standard it meets and exactly what you will receive.